DIY Mechanical Helve Power Hammer: Reinforced tool for heavy forging of metal #shortvideos - Video

This video shows a DIY mechanical helve power hammer performing high-speed forging strokes against an anvil block. Driven by an electric motor and belt pulley drive, the eccentric crank mechanism and spring linkages drive the ram up and down to deliver repeated heavy impacts for shaping hot metal in blacksmithing operations.

DIY Mechanical Helve Power Hammer

????Estimated Price Range: $350 - $1,200

Specification:
- Type: Mechanical Spring Helve / Crank Power Hammer
- Power Source: Electric Motor with Belt Drive & Flywheel
- Ram Mechanism: Eccentric Crank Disk with Spring Linkage
- Structure: Fabricated Steel Frame & Anvil Block Assembly
- Features: Variable Speed Control, Spring-Assisted Recoil, Heavy Impact Frequency

How to use:
1. Ensure the power hammer frame and anvil base are securely anchored to the floor.
2. Turn on the electric motor to drive the flywheel and eccentric crank mechanism.
3. Heat the metal workpiece in a forge until it reaches proper forging temperature.
4. Position the hot metal on the anvil block under the reciprocating hammer die to draw out or shape the material.

Here is a list of tools also used for Blacksmithing & Metal Forging: Gas Propane Forge, Blacksmith Anvil, Forging Tongs, Cross Peen Hammer, Angle Grinder, Metal Swage Block, Safety Goggles, Heat-Resistant Gloves.

#tool_vision #shorts #blacksmithing #powerhammer #metalworking #forging #tools