Dodging Glowing Hot Metal Rods at High Speed #worker #process #steel #factory #skills - Video

## 1. Task Introduction: Hot metal rod rolling and looping process to progressively reduce steel billet cross-sections into thinner rods through synchronized manual catching and feeding.

## 2. Equipment and Materials: Heavy-duty mechanical reduction rolling mill stands, specialized long-reach metal guiding tongs, glowing high-temperature carbon steel billets heated above 1,000°C, and reinforced floor channels.

## 3. Task Procedure: 1. Heat steel billets to plastic deformation temperature. 2. Pass heated billets through initial primary rolling stands. 3. Intercept high-speed emerging red-hot rods manually with tongs. 4. Guide glowing metal in a controlled parabolic arc into the intake of adjacent secondary rollers. 5. Repeat sequence progressively until required gauge is achieved.

## 4. Practical Tips and Precautions: Operators must read the trajectory and whip speed of the glowing loop instantly, timing footwork to avoid hot snagging, and maintaining firm tong grip without pinching the material too early to prevent mechanical jams.

## 5. Safety and Post-Management: Thermal heat shields, fire-resistant footwear, eye protection, and clear floor pathways are critical to prevent severe burns and entanglements. Periodic mechanical maintenance of roller bearings and cooling channels is essential.

## 6. Educational Purpose: This technical overview documents traditional high-risk industrial metal forming techniques, emphasizing workplace ergonomics, process mechanics, and required occupational safety protocols in manufacturing environments.