We Fixed 30 Leaking Jets… Then Found THIS! .....Arizona Hot Tub Factory - Video

We’ve been chasing leaks in this hot tub for almost a week!

This spa has 50 jets, and so far we’ve had to repair and reseal approximately 30 of them. After spending most of the week tracking down leaks, repairing jets and putting everything back together, we thought we finally had this hot tub sealed up.

So we filled it with water.

And found ANOTHER leak.

This time it wasn’t one of the jets. The leak was coming from an air line connection that apparently had not been properly glued/sealed at the factory.

Once I found the problem, I grabbed the line, put a little pressure on it, and the two pieces literally pulled apart in my hands.

Fortunately, this one turned out to be a pretty simple and inexpensive repair.

We cleaned up the connection and used Christy’s Red Hot Blue Glue to properly glue the plumbing back together. I also added a couple of zip ties to help support the line and keep everything securely in position.

After spending a week chasing leaks, it was nice to finally find one that was a cheap fix that took less than an hour.

This is also a good example of why finding a hot tub leak isn’t always as simple as spotting some water underneath the spa. Sometimes you fix one leak, fill the tub again, and discover another one.

My name is Scott with Arizona Hot Tub Factory, and they call me SpaMan.

On this channel I show real-world hot tub repairs, service calls, troubleshooting and some of the strange problems we run into working on spas every day.

If these videos help you, LIKE the video, SUBSCRIBE to SpaMan and leave your hot tub questions in the comments.

Remember: It’s just a tub that blows bubbles and heats up. Don’t go crazy, everybody!

See you on the next video.